Vast Resources plc / Ticker: VAST / Index: AIM / Sector: Mining
13 November 2020
Vast Resources plc
(‘Vast’ or the ‘Company’)
Increased Exploration Target at Baita Plai
Vast Resources plc, the AIM-listed producer & development company, is pleased announce an increase to the exploration target for its Baita Plai Polymetallic Mine (‘Baita Plai’) in
The previous 1.8M-3M tonnes exploration target referred to in the Report assigned 0.2M–0.5M tonnes to the Antonio North skarn and also included the historical 1,800,000 tonnes under the NAEN Russian Code, as announced on 10 December 2014. Following an analysis of historical data records, the exploration target tonnes assigned to the Antonio North skarn has been updated to between 1.4M–2.8M tonnes giving an increased total gross exploration target of between 3.2M–5.8M tonnes.
Based on these findings, the Directors believe that the Antonio North skarn represents a major near to medium term mining opportunity illustrated below in Figure 1. An underground exploration drilling programme is currently being compiled to better determine its potential.
Andrew Prelea, CEO of Vast Resources PLC commented:
“Antonio North represents a major opportunity for the Company not only to expand our production profile but also to significantly extend the life of mine plan at Baita Plai. In our initial exploration target of between 1.8M–3M tonnes, Antonio North represented 0.2M-0.5M tonnes; however, based on this new information Baita Plai and subject to further confirmation we will have an increased exploration target of between 3.2M–5.8M tonnes. The significant value potential of Baita Plai continues to reveal itself and we are committed to maximising this.”
Data comprising available historical assay results, logged lithologies and general plan data was recently collated from data archives accessed by the mine geologists and Mr. Harvey, which has enabled the construction of a basic geological model for the Antonio North skarn. This has led to a revised Company determined exploration target for Baita Plai as detailed below:
|Exploration Target|| Range |
| Range |
| Range |
| Range |
| Range |
| Range |
The Antonio North skarn is located approximately 200m to the north of the Antonio skarn. Historic drilling from 15 level and 16 level identified a skarn below the Antonio skarn, which was subsequently mined between 15 and 16 level. Underground development on 17 and 18 levels is limited and intersected the Antonio North skarn on the western margin of the skarn. Limited mining of the Antonio North skarn has taken place on 17 and 18 levels due to the underground development not continuing below 16 level as depicted in Figure 1 (to view the release with the illustrative diagrams please see the link at the bottom of the announcement).
Figure 1: 3-Dimensional Image showing the previous interpreted extent of the Antonio North Skarn
There is a major near to medium term opportunity for the mine to extend both the 17 and 18 level development along strike of the Antonio North skarn and to commence mining as the infrastructure is developed.
Analysis of the historical drill hole records which are presumed to have been drilled in the early 1990’s, revealed numerous skarn intersections. Unfortunately, not all the records had corresponding assay data or other data such as date drilled, type of drill used or where laboratory assays were undertaken. The Antonio North skarn has been interpreted from underground intersections in 17 and 18 level development on the western margin, from underground intersections in the 15 and 16 level development above, and from four historic underground drill holes drilled from 15 level.
The drill holes intersecting the Antonio North skarn are L-16, L-28, 1388BSK and 1389BSK. The assay values from these drill holes are provided in mm. A weighted average copper % is calculated as 1.66%, lead % at 0.02% and zinc % at 0.08%. The drillholes and extent of the newly interpreted Antonio North skarn are depicted in Figure 2.
“NA” = No Assay
Figure 2: 3-Dimensional Image showing the extent of the newly interpreted Antonio North Skarn and the historic underground drill holes
Based on the recent drilling in the adjacent Antonio skarn, the Company expects that a similar grade range for copper, lead, zinc, gold, and silver would be present in the Antonio North skarn. The historic drillhole intersections show that the grades are present and within the same broad range.
An underground drilling programme is being developed to test the geological interpretation by drilling a series of underground diamond drill holes from 15 level to intersect the Antonio North skarn.
The information in this announcement is based on information compiled by Mr Craig Harvey, the Chief Operating Officer and Group Geologist for Vast and a full-time employee of the company. Mr Harvey is a Competent Person who is a Member of the Australian Institute of Geoscientists and of the Geological Society of
Mr Harvey has sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration and to the activity being undertaken to qualify as a Competent Person as defined in the 2012 Edition of the ‘Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves’. Mr Harvey consents to the inclusion in the report of the matters based on his information in the form and context in which it appears.
For further information, visit www.vastplc.com, follow the Company on Twitter @vast_resources and LinkedIn, or please contact:
|Vast Resources plc|
Andrew Prelea - CEO
+44 (0) 20 7846 0974
|Beaumont Cornish - Financial & Nominated Adviser |
+44 (0) 020 7628 3396
|SP Angel Corporate Finance LLP – Joint Broker |
+44 (0) 20 3470 0470
|Axis Capital Markets Limited – Joint Broker |
+44 (0) 20 3206 0320
|St Brides Partners Limited |
+44 (0) 20 7236 1177
The information contained within this announcement is deemed by the Company to constitute inside information as stipulated under the Market Abuse Regulations (EU) No. 596/2014 (“MAR”).
ABOUT VAST RESOURCES PLC
Vast Resources plc is a United Kingdom AIM listed mining company with mines and projects in
The Company’s Romanian portfolio includes an 80% interest in the producing Baita Plai Polymetallic Mine, located in the Apuseni Mountains, Transylvania, an area which hosts Romania’s largest polymetallic mines. The mine has a JORC compliant Reserve & Resource Report which underpins the initial mine production life of approximately 3-4 years with an in-situ total mineral resource of 15,695 tonnes copper equivalent with a further 1.8M–3M tonnes exploration target. The Company is now working on confirming an enlarged exploration target of up to 5.8M tonnes.
The Company also owns the Manaila Polymetallic Mine in
The following is a summary of technical terms:
|Cut-off||The cut-off grade the lowest grade, or quality, of mineralised material that qualifies as economically mineable and available in a given deposit. May be defined on the basis of economic evaluation, or on physical or chemical attributes that define an acceptable product specification;|
|Grade||Grade(s) means the quantity of ore or metal in a specified quantity of rock|
|Hornfels||A dark, fine-grained metamorphic rock consisting largely of quartz, mica, and particular feldspars.|
|M||a written abbreviation for the number million.|
|Mineral Resource||A 'Mineral Resource' is a concentration or occurrence of solid material of economic interest in or on the Earth's crust in such form, grade (or quality), and quantity that there are reasonable prospects for eventual economic extraction. The location, quantity, grade (or quality), continuity and other geological characteristics of a Mineral Resource are known, estimated or interpreted from specific geological evidence and knowledge, including sampling. Mineral Resources are sub-divided, in order of increasing geological confidence, into Inferred, Indicated and Measured categories.|
|Inferred Mineral Resource||An 'Inferred Mineral Resource' is that part of a Mineral Resource for which quantity and grade (or quality) are estimated on the basis of limited geological evidence and sampling. Geological evidence is sufficient to imply but not verify geological and grade (or quality) continuity. It is based on exploration, sampling and testing information gathered through appropriate techniques from locations such as outcrops, trenches, pits, workings and drill holes.|
|Indicated Mineral Resource||An 'Indicated Mineral Resource' is that part of a Mineral Resource for which quantity, grade (or quality), densities, shape and physical characteristics are estimated with sufficient confidence to allow the application of Modifying Factors in sufficient detail to support mine planning and evaluation of the economic viability of the deposit.|
|JORC Code||Australasian Institute of Mining and Metallurgy Joint Ore Reserves Committee code on mineral resources and ore reserves|
|Lithologies||The study of the general physical characteristics of rocks.|
|Mineralisation||Process of formation and concentration of elements and their chemical compounds within a mass or body of rock|
|Skarn||Lime-bearing siliceous rock produced by the metamorphic alteration of limestone or dolomite.|